| |
|
|
The front panel is made
up of 3 specific areas:
- The LED panel.
- The Adjustment Buttons.
- Output Sockets
The LED’s are marked A - H and are used to identify
various operations of the VP-40. The LED panel is covered in more
detail later.
Adjustment operations can be
made using the four buttons marked Select, -, +,
and Save, again these are covered in more detail later.
The output sockets are used to
connect the VP-40 to your four display monitors.
Rear Panel
The rear panel is made up
of four specific areas:
- Sync sockets.
- Input sockets
- Power sockets
- Power LED’s
The Sync sockets are used when
multiple VP-40’s are connected together and it is required that all
displays be locked. For most applications this is not necessary
therefore connecting Sync in and out sockets is not normally required.
For applications that do require all displays to be locked the following
connections should be made:
- The first VP-40 (Sync Out)
connects to the second VP-40 (Sync In).
- The Second VP-40 (Sync Out)
connects to the third VP-40 (Sync In) and so on.
Warning! The equipment can
be damaged if the Sync sockets are not connected as described above.
The Input socket is used
to connect the input source to the VP-40.
The Power In socket is
where the power source is connected to the VP-40. The VP-40-PSU
supplied with the VP-40 is plugged into the Power In socket. The
Power Out socket can be used if you possess a more powerful Power
Supply Unit (PSU) which can link to multiple VP-40 controllers. Pixell
does not supply such power supply units.
The Power and Ready
LED’s indicate phases of operation, details of which are highlighted
later in the manual.
|
Input Resolution |
Output Resolution |
|
VESA XE "VESA"
720 x 400 at 70 and 85Hz |
4 x 360 x 200
Each output line is doubled. |
|
VESA 720 x 480 at 60Hz |
4 x 320 x 175
Each output line is doubled. |
|
VESA 640 x 350 at 85Hz |
4 x 320 x 175
Each output line is doubled |
|
VESA 640 x 400 at 85Hz |
4 x 320 x 200
Each output line is doubled. |
|
VESA 640 x 480 at 60, 72,75, 85Hz |
4 x 320 x 240
Each output line is doubled. |
|
VESA 800 x 600 at 56, 60, 70, 75, 85Hz |
4 x 400 x 300
Each output line is doubled. |
|
VESA 1024 x 768 at 60, 70, 75, 85Hz |
4 x 514 x 384
Each output line is doubled. |
|
VESA 1152 x 864 at 75Hz |
4 x 576 x 432
Line double optional. |
|
VESA 1280 x 960 at 60 and 85Hz |
4 x 640 x 480
Line double optional. |
|
VESA 1280 x 1024 at 60, 75Hz |
4 x 640 x 512
Line double optional. |
|
VESA 1600 x 1200 at 60Hz |
4 x 800 x 600 |
|
2048 x 1536 at 25, 30, 35 and 37Hz* |
4 x 1024 x 768 |
|
2304 x 1728 at 31 and 37Hz* |
4 x 1152 x 864 |
|
2560 x 2048 at 23, 25 and 28Hz* |
4 x 1280 x 1024 |
|
1600 x 1200 at 30, 36, 37, 42, 56 and 60Hz* |
4 x 1280 x 1024 |
|
1280 x 960 at 60, 72, 75 and 85Hz* |
4 x 640 x 480 |
|
1280 x 700 at 85Hz* |
4 x 640 x 350
|
|
1280 x 800 at 85Hz* |
4 x 640 x 400
|
|
1440 x 800 at 85Hz* |
4 x 720 x 400 |
*Special display mode
required from the VP-500/1000/1500 output.
|
VP-40 Physical
Dimensions |
|
|
Operating Temperature
Range |
32 - 95 DegF |
|
Power Requirements
|
9 - 15V DC at 2 amps (max). Requires VP-40-PSU. (External PSU) |
|
Cooling |
The unit contains a cooling fan. The input and output vents
should not be restricted. |
|
VGA Input |
1 x DVI connector. Analog or digital |
|
Display outputs |
4 x DVI connectors Analog or digital |
|
Gen-Lock input/output |
2 x RCA connectors. TTL voltage levels |
|
Power connector |
5 pin DIN |
|
VP-40-PSU |
|
|
VP-40-PSU Physical
Dimensions |
5.25 x 2.25 x 1.18” |
|
Input power |
110 - 240v AC 50-60Hz |
|
Operating Temperature
Range |
32 - 95 DegF |
|
Output power |
12V DC at 3.75 amps (max) |
|
|
|
